Premise Granules - 3.6 lb

Product Label / Material Safety Data Sheet (MSDS)

Premise Granules

Active Ingredient: Imidacloprid 0.5%

Other Ingredient: 99.5%

Size: 3.6 lbs

Not For Sale In: NY

Target Pest: Subterranean Termite species of Coptotermes, Heterotermes, Reticulitermes, and Zootermopsis

Description: Use Sites: This product can be applied as directed to bare soils, landscaped areas and turfgrass immediately surrounding commercial and residential structures, as well as other wooden constructions subject to termite attack. Applications should not be made when areas are waterlogged or when the soil is saturated with water. Adequate distribution of the active ingredient into the soil where termites are active cannot be achieved when these conditions exist.

Perimeter applications: This product can be used as a perimeter band application 3 to 10 feed wide around and adjacent to the structure foundation in commercial and residential areas. to kill subterranean termites foraging near commercial and residential structures, apply this product at a rate of 1.8 lb. (29 oz.) of per 1,000 sq. ft. Irrigation of treated areas (not to the point of run-off) will move the active ingredient through the thatch layer in turf, through ground covering and into the underlying soil where termites forage. Apply this product uniformly over the area being treated with standard granular application equipment; including hand-help spreaders or shaker cans, and wheel-mounted spreaders. Calibrate application equipment prior to use according to the manufacturer's direction.

Soil Incorporation: Use this product to make spot treatments to kill termites in soil which may be present at the time of application. Incorporate this product in localized areas of soil along the foundation of commercial and residential structures, or in soil adjacent to other threatened wooden constructions. After digging a narrow trench (about 6 inches in width and 6 inches in depth), uniformly incorporate 1/6 lb. (3.0 oz.) of this product per linear foot of trench. Mix this product thoroughly with the soil when backfilling the trench. Alternately, incorporate at a rate of 1/3 lb. (5.0 oz.) of this product per sq. ft. of surface at critical areas such as around plumbing, bath traps. utility services or wells/cisterns, and around poles or posts, fencing and decking materials, landscape timbers and similar non-structural wood-to-soil contacts.